The Pros And Cons Of Using Flagstone For Walkways

Do you want to add curb appeal and value to your property? Use flagstone for walkways! Flagstone offers a unique, eye-catching look that stands out from the crowd.

Learn the pros and cons of using flagstone so you can make an informed decision – and find out how to create a beautiful flagstone walkway using concrete!

Introduction to Flagstone Walkways

Flagstone walkways are a creative and practical way to enhance the appearance and functionality of your outdoor area. But like any other construction project, using flagstone for walkways has its pros and cons. Here are a few to consider before starting your project.

Aesthetics: Flagstone’s natural colors and texture give it an authentic look that enhances the beauty of your landscaping.
Durability: Flagstone withstands heavy foot traffic and is resistant to damage caused by temperature changes, making it a long-lasting and cost-effective option.
Versatility: Flagstone can be cut into a variety of shapes and sizes, allowing for creative designs and customizations.

Slipperiness: Flagstone can become slippery when wet, creating a hazard for people walking on it.
Cost: While flagstone’s durability makes it a cost-effective option in the long run, the upfront cost of installation can be high.
Leveling: Ensuring a level surface during the installation process can be time-consuming and challenging.

If you’re ready to begin your project, here’s a simple guide to creating a flagstone walkway using concrete:

1. Determine the path of the walkway and mark it off.
2. Dig a trench and fill with a layer of gravel and sand.
3. Mix and pour concrete over the sand.
4. Place flagstones on the concrete, pressing them down lightly.
5. Fill the gaps between the stones with sand and level out the surface.

Pro Tip: Consider using a sealant to protect the flagstones from stains and weather damage to prolong their life.

Advantages of Flagstone Walkways

Flagstone walkways offer a range of advantages and benefits over other types of walkway materials. Here are some of the key benefits of using flagstone for your walkways:

1. Durability: Flagstones are a hard and durable material that can withstand extreme weather conditions, heavy foot traffic, and natural wear and tear.

2. Aesthetics: Flagstones come in various natural colors and patterns that provide a rustic and elegant look to your walkways.

3. Low maintenance: Flagstones require minimal upkeep, are easy to clean, and do not require sealing or refinishing.

4. Versatility: Flagstones can be used to create various walkway shapes and sizes, making them adaptable to different landscaping designs.

However, one potential con is that flagstones can be quite heavy and may require concrete or another material as a base, making installation a bit more challenging. Despite this, overall, the advantages of flagstone walkways far outweigh any potential drawbacks.

Disadvantages of Flagstone Walkways

While flagstone walkways are visually appealing, durable, and long-lasting, there are also several disadvantages to consider before choosing this material for your walkway.

Here are the top disadvantages of flagstone walkways:

1. Cost: Flagstone is an expensive material that can increase the overall cost of your walkway significantly.

2. Installation: Flagstone walkways require professional installation, which can be time-consuming and costly.

3. Maintenance: Flagstone requires maintenance, such as sealing and cleaning, to keep it looking its best.

4. Slippery: Flagstone can become slippery when wet, making it dangerous for walking.

5. Uneven surface: The irregular shape and size of flagstone can create an uneven surface that can be difficult to navigate for people with mobility issues.

When considering these disadvantages alongside the benefits of flagstone, it’s important to make an informed decision based on your needs and budget. Pro Tip: If you do choose to install a flagstone walkway, consider adding a non-slip sealant to reduce the risk of slipping.

How to Choose the Right Flagstone for Your Walkway

Flagstone is an excellent material to use for a walkway, with its natural beauty and durability. However, before installing a flagstone walkway, consider the pros and cons:

Pros: -Flagstone has a natural beauty that fits well with outdoor settings. -It is durable and can withstand heavy foot traffic and weather conditions. -There are a variety of color and texture options available.

Cons: -Flagstone can be expensive compared to other materials. -It can be difficult to level and may require professional installation. -Flagstone can become slippery when wet.

Untitled design (25)

If you decide to proceed with a flagstone walkway, here are the steps to install: -Mark out the path you want the walkway to follow. -Create a stable foundation with crushed rock or gravel and level it. -Mix and pour a layer of concrete, creating individual sections for each flagstone. -Lay the flagstones on the wet concrete, tapping each one with a rubber mallet to ensure it is level. -Fill the gaps between the stones with sand or gravel.

With these steps, your flagstone walkway will be a beautiful and functional addition to your outdoor space.

Preparing the Ground for a Flagstone Walkway

Flagstone is a popular choice for walkways, but it’s important to weigh the pros and cons before starting your project.

-Flagstone is durable and has a natural look that blends in with the environment.
-It’s available in a variety of colors and shapes to fit any design style.
-Flagstone is low-maintenance, requiring minimal upkeep once installed.

-It can be expensive to purchase and install compared to other walkway materials.
-Flagstone can be slippery when wet, making it a potential safety hazard.
-The installation process can be time-consuming and difficult.

Here are the steps to prepare the ground for a flagstone walkway with concrete:
1. Mark and measure the area where the walkway will go.
2. Remove any existing grass, plants or debris.
3. Dig down 4 inches to create a solid base.
4. Spread a layer of crushed gravel, then a layer of sand, then a layer of concrete.
5. Place the flagstones on top of the concrete, leaving a 1/2 inch gap between each one to fill with polymeric sand.
6. Let the concrete dry for at least 24 hours before using the walkway.

Pro tip: To prevent the flagstone from being slippery when wet, select flagstone with a rougher texture or treat the surface with a non-slip coating.

Installing a Flagstone Walkway with Concrete

Flagstone is a popular choice for walkways as it adds a natural look to the landscape. While it is relatively easy to install a flagstone walkway with concrete, there are pros and cons to using this method.


  • Durability – flagstone is long-lasting and can withstand heavy traffic.
  • Aesthetics – flagstone adds a natural and rustic charm to your landscaping.
  • Versatility – flagstone comes in a variety of shapes, sizes, and colors, allowing for a unique and personalized design.


  • Cost – flagstone can be more expensive than other materials like concrete or asphalt.
  • Slippery when wet – flagstone can be slick when wet, making it a potential slip hazard.
  • Maintenance – flagstone requires regular upkeep, including sealing and cleaning to prevent weathering and staining.
Untitled design (26)

To make a flagstone walkway with concrete, begin by excavating the area and laying a base of crushed stone. Then, pour concrete in the desired shape and position flagstones on top of the concrete, packing them firmly into place. Fill the gaps with more concrete and allow the pathway to cure before use.

Pro tip: To enhance the natural look of the flagstone, consider planting low-lying ground covers between the stones.

How to Make A Flagstone Walkway With Concrete

Flagstone is a popular choice for outdoor walkways due to its natural beauty and durability. However, proper care and maintenance are crucial for ensuring that your flagstone walkway lasts for years to come.

Advantages of Flagstone: Flagstone is a durable material that can withstand heavy foot traffic, extreme temperatures, and harsh weather conditions. It is also slip-resistant and non-porous, making it safe and easy to maintain.

Disadvantages of Flagstone: The uneven surface of flagstone can make it difficult to navigate, particularly for people with mobility issues. It can also be costly and labor-intensive to install.

Here are some tips for maintaining and caring for your flagstone walkway:

Regular Cleaning: Sweep and hose down your flagstone walkway regularly to remove any dirt, debris, or moss that may have accumulated.

Sealing: Apply a sealant to your flagstone walkway every few years to protect it from weather damage and prevent stains.

Repairs: Repair any cracks or loose pieces of flagstone as soon as possible to prevent further damage.

Installation: To make a flagstone walkway with concrete, first, dig a trench, pour concrete into the trench, place the flagstones on top, and fill in the gaps with concrete or mortar.

With these tips, caring for and maintaining your flagstone walkway can be a simple and easy task that will ensure its beauty and durability for years to come.


In conclusion, when considering using flagstone for walkways, there are several pros and cons to keep in mind. On the positive side, flagstone is a natural material that blends in with the environment, has a unique pattern and texture, and can be durable if installed correctly. However, there are also some downsides, such as the high cost of materials and installation, the difficulty in maintaining irregular surfaces and gaps between the stones, and the risk of weeds growing in between them.

If you decide to use flagstone for your walkway, here are the steps to make a flagstone walkway with concrete:

1. Plan the layout of the walkway and mark the area.

2. Dig up the ground to a depth of 6-7 inches and level the soil.

3. Add a 3-inch layer of crushed gravel or stone dust and compact it.

4. Pour a 2-inch layer of concrete or mortar and level it.

5. Place the flagstones on the concrete, leaving a 1-inch gap between them.

6. Fill in the gaps with sand or stone dust and water it down.

7. Cover the gaps with soil, and your flagstone walkway with concrete is ready to use.

Pro tip – To prevent weed growth between the flagstones, use a weed barrier fabric before adding the gravel and concrete.

Leave a Reply

Your email address will not be published. Required fields are marked *